Author Topic: Peel Trident  (Read 18417 times)

Peel replica, Steve Fisk

  • Prolific Poster
  • *****
  • Posts: 560
Re: Peel Trident
« Reply #45 on: June 20, 2016, 10:50:11 PM »
yes mate, powder coated
« Last Edit: June 21, 2016, 04:25:16 PM by Peel replica, Steve Fisk »

Stuart Cyphus

  • Possibly the most fabulous person in the universe....
  • Prolific Poster
  • *****
  • Posts: 1491
Re: Peel Trident
« Reply #46 on: June 20, 2016, 11:28:54 PM »
 ...as the Bishop said to the Actress.   ;)

Peel replica, Steve Fisk

  • Prolific Poster
  • *****
  • Posts: 560
Re: Peel Trident
« Reply #47 on: July 25, 2016, 10:38:50 PM »
There must be something going on with all these wheels being cut around recently I thought I would join in , needed a brake disc and speedo drive so I'm guessing this might work

Peel replica, Steve Fisk

  • Prolific Poster
  • *****
  • Posts: 560
Re: Peel Trident
« Reply #48 on: July 25, 2016, 10:40:19 PM »
.

Big Al

  • Prolific Poster
  • *****
  • Posts: 4578
  • Ranttweiler, biting the breeze block of banter
Re: Peel Trident
« Reply #49 on: July 26, 2016, 07:42:27 AM »
Trispoked wheel, for a trike called a Trident. Oh, yes! Working well over there.
Messerschmitt set, Goggo Darts, Heinkel 175, Fiat Jolly, Autobianchi, Fairthorpe Electron Minor, Borgward, Isuzu Trooper
Citroen BX 17TZD & GTI 16v
Held - MG Magnette ZB & 4/44
For sale - Vellam Isetta, Bamby, AC Type 70, Velorex, Church Pod, Reliant Mk5, KR200,  Saab 96, Bellemy Trials, Citroen BXs

Peel replica, Steve Fisk

  • Prolific Poster
  • *****
  • Posts: 560
Re: Peel Trident
« Reply #50 on: July 27, 2016, 01:11:13 PM »
Taken it to a few engineering places and no one wanted to weld car parts , tryed another place and it's been taken in to diside if they will do it so fingers crossed, or I will do an aluminium welding corse

Peel replica, Steve Fisk

  • Prolific Poster
  • *****
  • Posts: 560
Re: Peel Trident
« Reply #51 on: July 27, 2016, 07:32:40 PM »
Got it welded really nice fit to

Peel replica, Steve Fisk

  • Prolific Poster
  • *****
  • Posts: 560
Re: Peel Trident
« Reply #52 on: July 27, 2016, 07:33:23 PM »
.

Peel replica, Steve Fisk

  • Prolific Poster
  • *****
  • Posts: 560
Re: Peel Trident
« Reply #53 on: July 27, 2016, 07:34:02 PM »
.

1bubble10 (paul smith)

  • Quite Chatty
  • ****
  • Posts: 122
Re: Peel Trident
« Reply #54 on: July 28, 2016, 12:50:35 PM »
you didn't fancy a drum brake at the rear then
Bamby P50, Piaggio Ape 50

Peel replica, Steve Fisk

  • Prolific Poster
  • *****
  • Posts: 560
Re: Peel Trident
« Reply #55 on: July 29, 2016, 11:39:50 PM »
Keeping drum brake as hand brake , this brake calliper is connected to the fronts , made the speedo drive , just need to make all the brackets

Peel replica, Steve Fisk

  • Prolific Poster
  • *****
  • Posts: 560
Re: Peel Trident
« Reply #56 on: July 29, 2016, 11:41:03 PM »
.